Help.
My 930 has been laid up for a number of years and now I find I cannot open the engine compartment lid. The "t" shaped pull lever in the drivers door frame will not move, I do not want to apply too much force for fear of breaking it as it appears to be made of plastic .
I have sprayed WD40 into the crack on the lid but don't really know if I am getting close to the catch.
Any ideas? :?:
If you remove the trim under the rear window you will find the cable there. It goes along the shell of the car.
It could be a case of WD40 from inside the handle if not a set of pliers to pull the cable from inside the car will do the same as the handle to release the lid. This way you will not break the handle.