Jimmy Nitro
New member
- Joined
- 10 Oct 2018
- Messages
- 4
This listing is for a complete cat back stainless exhaust system for the Porsche 997.2 Carrera 09-11 for 3.6L and 3.8L models and is best suited to non PSE cars although will fit both.
The system consists of:
1. Right rear silencer aka side cans (Cargraphic Sport Sound Version / Tech 9 UK edition)
2. Left rear silencer aka side cans (Cargraphic Sport Sound Version / Tech 9 UK edition)
3. Centre silencer delete (Milltek)
I have used the system only very briefly on my Carrera 3.8S and have some clips of sound available if anyone would like to hear them. The items are advertised as a whole system but if someone wants the rear silencers / side cans only, please get in touch. Located near Warwick and will cooperate if someone wants to arrange their own courier. Looking for £1,400 for whole system. Full details below:
About the Cargraphic Silencers. These are manufactured in the UK by Phoenix Performance Exhaust, who independently develop and produce stainless steel high performance exhaust systems for Cargaphic.
These rear silencers have been produced specifically for Tech-9 Motorsport using the Cargraphic Exhaust System 'Sound Version' for the Porsche 997.2 Carrera 09-11. For 3.6L and 3.8L models and will fit the GTS also and offer a much better performance than the OEM exhaust with lifetime durability and the most amazing sound.
These silencers are designed as absorptive silencers which reduce exhaust back pressure drastically. The result is more power and a better response characteristic and a sporty deep aspirated 'euro' sound, but no resonance. The sound is exciting and not over-powering.
They are also considerably lighter than the OEM product (approx. 5.8kg).
Strengthened brackets with exact adjustment for painless installation and can be used with OEM tailpipes, which can be positioned precisely. Expect 7KW (10 PS) more horsepower and 10Nm additional torque pounds.
About the Milltek Centre Muffler delete. This is manufactured from Stainless Steel and fits the Cargraphic system well. The Crossover design of the Milltek system emulates the Sharkwerks design and gives more torque in the low and mid range. Fits with both Porsche Sport Exhausts (Valved) and Standard OE Systems. It is extremely light (4kg) and is supplied with fitting spacers.
Notes:
1. These items are in A1 condition having had only the lightest use.
2. Accepts the OEM Porsche tips
3. NO CEL
4. Offers a fine balance of power and sound WITHOUT resonance Guaranteed!
5. All Stainless steel construction
The system consists of:
1. Right rear silencer aka side cans (Cargraphic Sport Sound Version / Tech 9 UK edition)
2. Left rear silencer aka side cans (Cargraphic Sport Sound Version / Tech 9 UK edition)
3. Centre silencer delete (Milltek)
I have used the system only very briefly on my Carrera 3.8S and have some clips of sound available if anyone would like to hear them. The items are advertised as a whole system but if someone wants the rear silencers / side cans only, please get in touch. Located near Warwick and will cooperate if someone wants to arrange their own courier. Looking for £1,400 for whole system. Full details below:
About the Cargraphic Silencers. These are manufactured in the UK by Phoenix Performance Exhaust, who independently develop and produce stainless steel high performance exhaust systems for Cargaphic.
These rear silencers have been produced specifically for Tech-9 Motorsport using the Cargraphic Exhaust System 'Sound Version' for the Porsche 997.2 Carrera 09-11. For 3.6L and 3.8L models and will fit the GTS also and offer a much better performance than the OEM exhaust with lifetime durability and the most amazing sound.
These silencers are designed as absorptive silencers which reduce exhaust back pressure drastically. The result is more power and a better response characteristic and a sporty deep aspirated 'euro' sound, but no resonance. The sound is exciting and not over-powering.
They are also considerably lighter than the OEM product (approx. 5.8kg).
Strengthened brackets with exact adjustment for painless installation and can be used with OEM tailpipes, which can be positioned precisely. Expect 7KW (10 PS) more horsepower and 10Nm additional torque pounds.
About the Milltek Centre Muffler delete. This is manufactured from Stainless Steel and fits the Cargraphic system well. The Crossover design of the Milltek system emulates the Sharkwerks design and gives more torque in the low and mid range. Fits with both Porsche Sport Exhausts (Valved) and Standard OE Systems. It is extremely light (4kg) and is supplied with fitting spacers.
Notes:
1. These items are in A1 condition having had only the lightest use.
2. Accepts the OEM Porsche tips
3. NO CEL
4. Offers a fine balance of power and sound WITHOUT resonance Guaranteed!
5. All Stainless steel construction