Quick question to test my maths. Assuming PCD is the same, would 992 S 20/21 alloys conceptually fit onto a 911.1 C2?
Mine has Carrera Classic 2 20" with Porsche fitted 5mm spacers.
Sizes are:
My fronts 8.5j x 20 ET51
992 front 8.5j x 20ET 53
Should be a straight swap and can keep the 5mm spacer or not
Rears
Mine 11j x 20 ET70
992 11.5j x 21 ET67
So with my dodgy maths the 992 rears will stick out just over 10mm further - if I remove my spacer, then 5mm from where my current alloys sit now.
Plus the extra inch diameter will affect the geo I guess?
Does all the above seem right?
Thanks!
Mine has Carrera Classic 2 20" with Porsche fitted 5mm spacers.
Sizes are:
My fronts 8.5j x 20 ET51
992 front 8.5j x 20ET 53
Should be a straight swap and can keep the 5mm spacer or not
Rears
Mine 11j x 20 ET70
992 11.5j x 21 ET67
So with my dodgy maths the 992 rears will stick out just over 10mm further - if I remove my spacer, then 5mm from where my current alloys sit now.
Plus the extra inch diameter will affect the geo I guess?
Does all the above seem right?
Thanks!