911 Porsche Coupe DAS Sport Bolt-In Roll Cage 1974 to '89
Classic Porsche 911 Bolt in cage that comes in one section. Steel cage that was removed from my 1988 3.2 911.
Cage enables for harness to be fitted on drivers side.
Weight is 50lbs / 22.67Kg
Product Description
DESIGN:This specially designed bar, made exclusively for the 911 Coupe and Targa model years 1974 to 1989, requires no cutting, no drilling, no additional holes or any other modifications to the interior, upholstery or body of the car. The thoughtful design of the bar hugs the interior "b" pillar area and roof line. The bar uses existing welded in, threaded lugs from the Porsche factory as its mounting points. Loads are carried by the stronger rocker sections rather than the floor. Careful attention to design allows ample fore and aft movement for the front seats. Completely reversible installation with no evidence the bar was ever installed. Harness bar height follows NHRA guidelines.
CONSTRUCTION: Features 1-3/4" DOM mild steel tubing, 0.120" wall thickness, tig welded joints and air craft quality hardware. All bars come bare metal and can be painted, powder coated or leather covered by the buyer.
INSTALLATION: "Do-it-yourself" friendly. Easy to follow installation instructions with tech support. Estimated time for installation is 2.0 hours.
Price - £375.
Classic Porsche 911 Bolt in cage that comes in one section. Steel cage that was removed from my 1988 3.2 911.
Cage enables for harness to be fitted on drivers side.
Weight is 50lbs / 22.67Kg
Product Description
DESIGN:This specially designed bar, made exclusively for the 911 Coupe and Targa model years 1974 to 1989, requires no cutting, no drilling, no additional holes or any other modifications to the interior, upholstery or body of the car. The thoughtful design of the bar hugs the interior "b" pillar area and roof line. The bar uses existing welded in, threaded lugs from the Porsche factory as its mounting points. Loads are carried by the stronger rocker sections rather than the floor. Careful attention to design allows ample fore and aft movement for the front seats. Completely reversible installation with no evidence the bar was ever installed. Harness bar height follows NHRA guidelines.
CONSTRUCTION: Features 1-3/4" DOM mild steel tubing, 0.120" wall thickness, tig welded joints and air craft quality hardware. All bars come bare metal and can be painted, powder coated or leather covered by the buyer.
INSTALLATION: "Do-it-yourself" friendly. Easy to follow installation instructions with tech support. Estimated time for installation is 2.0 hours.
Price - £375.