Posted: Wed Jul 24, 2019 1:54 pm Post subject: REDUCED 997 Parts - Tubi, cargraphics, black headlights, etc
** PRICE REDUCTION **
Tubi Exhaust (w/ tips)- £1250
Cargraphics 200cell Cat (w/ o2 sensros) - £1100
Black Headlights - £500
7mm/15mm Extended Eibach lug nuts - £75
Went back to stock and selling some of the parts I have acquired over the last two years. all pictures on the bottom of the thread. if you read through my thread, you can find some comments (including exhaust sound clip)
prefer collection, particularly for the exhaust (you can transport them in a 997!), prices do not include shipping
free Mobile 0w40 oil cans on collection (got a bunch left)
First come first serve, any questions please let me know either here or pm.
Tubi Exhaust incl connecting pipes and tips - £1250
Less than 10k miles on the car. check out my old thread for sounds clips (in combination with cargraphics cat). The exhaust comes with connecting pipes for the tips, which are also included (had them poweder coated in black, some chips). You will need to use your OEM rings (mine broke back then), or use jubilee clips (i will add four to the package)
Black Exhaust Tips - £100
will also add 4 jubilee clips, in case you can't re-use your OEM rings
Cargraphics 200cell X-Pipe Sportscat (incl 4 lambda sensors) - £1200
Been on the car for less than 10k miles
Comes with 4x o2 sensors (cost ~£500), as we couldn't get my original ones out of the OEM cat back then
Aurora Projector Headlights Xenon black - £500
Bought them from D911, 991 proejctor style. came from new with small marks inside, see my thread for me review back then. you can wire the ring for DLR functionality (which i didn't, but it comes with wire extension) you will need to swap the internals of your oem headlights into this (control module, adjuster and bulbs). i had them fitted by D911 back then.
plug and play. i had lamin-x on them, so they have been protected. also i had the DLR module fitted for real DLR functionality
Eibach Black wheel nuts - £75
These are long wheel bolts for 7mm and 15mm spacers. Genuine Eibach springs, with the correct fittings for Porsche alloys
DT Induction Kit - £30
Porsche Black Crest - SOLD LED Side Markers - SOLD LED DRL Fogs - SOLD
OEM Engine Mounts - free/collection only
~70k miles on the car, replaced them with RSS semi solids back then
OEM 997 C2S PASM Sports springs - free/collection only
~70k miles on the car, replaced them with Eibach springs back then. have a bit of rust on the bottom
Joined: 18 Jan 2015 Posts: 3664 Location: Cheshire
Posted: Mon Aug 26, 2019 11:09 am Post subject:
I can highly recommend the Tubi exhaust. I've got it on my .2 C2S and it's Jekyl and Hyde sysyem. Keep it below 2.8k RPM and you wouldn't think anything of it.
After 2.8k, it sounds like an air cooled car. I went for a drive in mine yesterday and you don't get the drone at 70mph on the motorway. Any recording I've ever heard doesn't do this exhaust justice.
Cold starts are my favourite.....😎 _________________ 997.2 Carrera 2S GT Silver/Cocoa.
Jam911 Albert Park
Joined: 31 Oct 2010 Posts: 1514
Posted: Mon Aug 26, 2019 3:17 pm Post subject:
I would like the springs please.
Where are you for collection? _________________ Current '07 997 C4S
Ex '99 2.5 Boxster
Joined: 19 Mar 2017 Posts: 153 Location: London
Posted: Mon Aug 26, 2019 3:21 pm Post subject:
apols, someone pm'd me earlier this afternoon for the springs and other bits. Also, these are for 2wd (i see in your signature c4s?).
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You can attach files in this forum You can download files in this forum You cannot post calendar events in this forum