Hi all. Hoping to call upon your expertise.
I have a 997.1 Carrera 4s (2006) which has the GT3 kit (including Rear spoiler from factory)
I have bought a 2nd hand rear deck lid and fitted it to the car to give it a more classic 911 look.
I knew that once the rear deck lid was fitted (which it is now) that I would need to activate the rear spoiler. I have Bought the Foxwell NT520 kit which is supposed to do activation on this car and spoiler.
According to the Foxwell NT520 kit, the spoiler is now activated (after a series of button pressing)
However the spoiler does not work at all. A few facts and tests I have done along the way.
1. The fuse is OK
2. When pressing the spoiler button (in cabin) it does not light up and the spoiler does not raise.
3. When looking at the live data for the rear spoiler button, the tool recognises that the button is being pressed.
4. when doing a component test for the button with the NT520, it lights up the spoiler button light, but the spoiler does not raise.
So I am wondering if anybody else has done this, and is there something else i am missing that needs to be installed or checked before the spoiler will work?
Could it be that the tool is just junk, and not actually activating anything (even though I get a message to say it is activated)
I know the PIWIS/Durametric is supposed to be able to do this function, but does the china clone kit do it or not?
Any help is welcome. Thanks.
Satch.
I have a 997.1 Carrera 4s (2006) which has the GT3 kit (including Rear spoiler from factory)
I have bought a 2nd hand rear deck lid and fitted it to the car to give it a more classic 911 look.
I knew that once the rear deck lid was fitted (which it is now) that I would need to activate the rear spoiler. I have Bought the Foxwell NT520 kit which is supposed to do activation on this car and spoiler.
According to the Foxwell NT520 kit, the spoiler is now activated (after a series of button pressing)
However the spoiler does not work at all. A few facts and tests I have done along the way.
1. The fuse is OK
2. When pressing the spoiler button (in cabin) it does not light up and the spoiler does not raise.
3. When looking at the live data for the rear spoiler button, the tool recognises that the button is being pressed.
4. when doing a component test for the button with the NT520, it lights up the spoiler button light, but the spoiler does not raise.
So I am wondering if anybody else has done this, and is there something else i am missing that needs to be installed or checked before the spoiler will work?
Could it be that the tool is just junk, and not actually activating anything (even though I get a message to say it is activated)
I know the PIWIS/Durametric is supposed to be able to do this function, but does the china clone kit do it or not?
Any help is welcome. Thanks.
Satch.