Chateauneuf
New member
- Joined
- 24 May 2017
- Messages
- 13
Hello,
I found a similar thread in the 996 forum but the wiring looks different.
I've purchased and wired a Kenwood stereo into my 2005 997 and everything works except the amp isn't turning on and there is no bass in the car. Tweeters work fine.
I've plumbed the PCM back in and the amp works so it's something that doesn't work on the plug and play Connects2 kit. http://www.connects2.co.uk/Product/ProductItem/CTSPO005.2
My thoughts are that the amp isn't being switched in and I believe this is because the black/red wire (pin 2) needs connecting to the blue/white on the Kenwood loom. Has anyone come across this in wiring a new stereo to a 997? I've trawled online but not found the exact diagram to my situation.
Here is the connector with the wire in question.
Any help appreciated. It's driving me maaaad!
I found a similar thread in the 996 forum but the wiring looks different.
I've purchased and wired a Kenwood stereo into my 2005 997 and everything works except the amp isn't turning on and there is no bass in the car. Tweeters work fine.
I've plumbed the PCM back in and the amp works so it's something that doesn't work on the plug and play Connects2 kit. http://www.connects2.co.uk/Product/ProductItem/CTSPO005.2
My thoughts are that the amp isn't being switched in and I believe this is because the black/red wire (pin 2) needs connecting to the blue/white on the Kenwood loom. Has anyone come across this in wiring a new stereo to a 997? I've trawled online but not found the exact diagram to my situation.
Here is the connector with the wire in question.
Any help appreciated. It's driving me maaaad!