infrasilver
Moderator
- Joined
- 4 Oct 2010
- Messages
- 9,934
infrasilver said:It's not something I have had chance to look at yet but will report back as soon as I work it out.
Just popped these off today, it was two pins going into plastic clips, I levered them off under the rubber first then eased the rest up, came off quite easily. They are actually aluminium not plastic as I had thought (used a magnet to check originally).
I have prepped with first coat of primer and will base coat and lacquer when I get chance.
There is evidence that water sits at the end of these blades and why they have corroded. Hopefully it helps someone in the future?