andrewkite
New member
- Joined
- 2 Jun 2018
- Messages
- 8
H All,
I am swapping my pcm2.1 which does not have bose but does have the sound package plus so sill has a amp.
I thought I required a wiring harness to swap over, So I went to order one from Dynamic sounds who are well respected.
They advised that all i required was 2 x 12V+ from a ignition source. 1 for the radio and 1 for the amp. But he would not tell me how to power the amp.
So i have found a 12v ignition switched from the fuse box, and the radio will turn on and off fine.
I just need to power the amp which i am struggling with.
I have read loads of posts about this but can not find the answer, As most have bose which need the wiring harness.
TIA.
I am swapping my pcm2.1 which does not have bose but does have the sound package plus so sill has a amp.
I thought I required a wiring harness to swap over, So I went to order one from Dynamic sounds who are well respected.
They advised that all i required was 2 x 12V+ from a ignition source. 1 for the radio and 1 for the amp. But he would not tell me how to power the amp.
So i have found a 12v ignition switched from the fuse box, and the radio will turn on and off fine.
I just need to power the amp which i am struggling with.
I have read loads of posts about this but can not find the answer, As most have bose which need the wiring harness.
TIA.