Porsche 911UK Forum

Welcome to the @Porsche911UK website. Register a free account today to become a member! Sign up is quick and easy, then you can view, participate in topics and posts across the site that covers all things Porsche.

Already registered and looking to recovery your account, select 'login in' and then the 'forget your password' option.

Remote clutch bleeder.

Endoman

Well-known member
Joined
11 Apr 2011
Messages
1,588
As anyone who has done this will know it's a struggle to get at the clutch slave bleed (even worse on a 944).
There is a thread on Rennlist on the topic. So with the help of HEL I have made one. M6 banjo one end and a bulkhead bleeder the other.
Not fitted yet.
Anyone else tried this?
 

Attachments

  • slave_213.jpg
    slave_213.jpg
    136.6 KB · Views: 1,770
Endoman said:
Anyone else tried this?

No, but it's on my 'to do' list. Where are you going to locate the bleeder? I've seen the Rennlist thread and I don't subscribe to the 'must be above the slave' view (simple physics).

Your hose arrangement looks good - could you post your parts list?
 
The pipe with banjo was made by HEL, very good service, I couln't find any other m6 adaptor so they made it to special order with an m6 banjo. The bleed nipple is a Goodridge part from Merlin Motorsport with a compression fitting, bulkhead bleeder 443. I've asked them to make another with the bulkhead bleeder on but as they are a Goodridge competitor I may have to fit it myself again. Next bit is to fabricate a support bracket and I'll probably use p-clips to secure the flexy or cable ties where it can't be seen. Both slaves have nice machined flats where the banjo fits so the crush washers should seal. This one will go on the 944 as it is a real pig to get at.
 

New Threads

Forum statistics

Threads
124,358
Messages
1,439,476
Members
48,717
Latest member
Atlas.997
Back
Top