robbiej said:so the wheel has a module 95B959256C in it its not that, thanks for info above!
This one sits in the column near the stalks mate :thumb:
Welcome to the @Porsche911UK website. Register a free account today to become a member! Sign up is quick and easy, then you can view, participate in topics and posts across the site that covers all things Porsche.
Already registered and looking to recovery your account, select 'login in' and then the 'forget your password' option.
robbiej said:so the wheel has a module 95B959256C in it its not that, thanks for info above!
tom_nieto said:I don't have a fancy multifunction wheel, so no worries about electronics, but would it be possible to retro fit a newer style (997.2 or 991) wheel to my 997.1?
phill did mine for under £500 best mod I've done ðŸ‘Phil 997 said:Robbie,
That steering wheel will fit a gen 1 and you will need the 997.2/991 airbag for it
the steated wheel will only work if you have heated seats in your car if you have then there is no reason it wont work .
You will need the newer steering control module they are about £230 and you will need to get your opc to turn on the multifunction option through piwis even thought you dont have MF if still needs to be turned on to make the horn work. you must insist at the opc they do this as they think they know better, and they dont. also from the pic it looks like you might be missing the springs that make the airbag/ horn return when you press it they are only a few quid at the opc you cant use the gen1 ones they are too short.
good luck sorting it and funny I always tell people the steering wheel change mod is about £1000 and by the time you have the new module that will be where your at . dont forget to make sure the wiring loom is in the grove for it as you slide the airbag in also apply a small amount of silicon grease around the edge of the airbag this will help stop it from sticking. :thumb: :thumb:
robbiej said:the garage still has it as the bumper respray did not go as planned.....
the foreman said the wheel drove great with the paddles and looks better, he really likes it but said it was a quick fit, ie no money for him
isysman said:There seems to be an assumption you need the new module when doing this mod, but not everyone will need it as shown here. I fitted a new wheel to my car and did not need it. Anyone doing this mod should try fitting before spending £230 on a module.
robbiej said:apparently the horn works as well!
no pics yet, looks like they need to re-paint the bumper as the had micro cracks from the primer. The painter said you get that with copies but its a new Porsche part!
robbiej said:apparently the horn works as well!
no pics yet, looks like they need to re-paint the bumper as the had micro cracks from the primer. The painter said you get that with copies but its a new Porsche part!