Porsche 911 UK Enthusiasts Online Community Discussion Forum GB

Welcome to the @Porsche911UK website. Register a free account today to become a member! Sign up is quick and easy, then you can view, participate in topics and posts across the site that covers all things Porsche.

Already registered and looking to recovery your account, select 'login in' and then the 'forget your password' option.

Gen2 steering wheel installation horn fix!

kam

Nurburgring
Joined
21 Jun 2003
Messages
475
XXX I have no responsibility if you are going to do this mod. don't try this if you do not feel comfortable working on air bags. XXX

I installed a manual Gen2 steering wheel in my Gen1 997 Turbo.
Managed to get the horn working with the following.

From the rear of the connector, pop off the yellow cover.
Cut top row black wires as shown below.
Join wire 1 with a crimp connector and self tap screw into the steering wheel.
Wire 2 extended connected onto the rear of the air bag with a spade connector.

Wire 1 horn works with ignition / engine running.
Wire 2 horn works with ingnition off, key removed.





 
Good job :thumb:

I really like this steering wheel and considering doing the same on my C2S, did you buy the wheel and airbag direct from Porsche? Seems to be the best price, cheaper that D911!
 
DucatiRob said:
Good job :thumb:

I really like this steering wheel and considering doing the same on my C2S, did you buy the wheel and airbag direct from Porsche? Seems to be the best price, cheaper that D911!

Aha.. just read your other post and see you bought it privately!
 
DucatiRob said:
DucatiRob said:
Good job :thumb:

I really like this steering wheel and considering doing the same on my C2S, did you buy the wheel and airbag direct from Porsche? Seems to be the best price, cheaper that D911!

Aha.. just read your other post and see you bought it privately!

Paid £550 for the wheel, bargain! Feels great, getting the gaiter and arm rest covered in alcantara to match.
Thanks.
 
Nic job👍👍👍
 
silvermilnec said:
Nic job👍👍👍

Thank you!, glad to share :thumbs:
 
Looks great, I am going to do that mode soon... have you had your seats recovered? They look nice too :thumb:

Edit: just realised they are bucket seats :oops:
 
apollokre1d said:
Looks great, I am going to do that mode soon... have you had your seats recovered? They look nice too :thumb:

Edit: just realised they are bucket seats :oops:
Thank you!, really happy with them. 8)
 
kam said:
apollokre1d said:
Looks great, I am going to do that mode soon... have you had your seats recovered? They look nice too :thumb:

Edit: just realised they are bucket seats :oops:
Thank you!, really happy with them. 8)

Really want to get those but my wife loves the heated seats.... how are you finding winter without them?
 
Alfaian said:
That looks the dogs gonads mate, FairPlay :thumb:
Nothing more said! :D
 
kam said:
XXX I have no responsibility if you are going to do this mod. dont try this if you do not feel comfortable working on air bags. XXX

I installed a manual Gen2 steering wheel in my Gen1 997 Turbo.
Managed to get the horn working with the following.

From the rear of the connector, pop off the yellow cover.
Cut top row black wires as shown below.
Solder wire 1 with a crimp Connector and tap into the steering wheel.
Wire 2 extended connected onto the rear of the air bag with a spade connector.

Wire 1 horn works with ignition / engine running.
Wire 2 horn works with ingnition off, key removed.






Quick question on this. Having the same issue with mine after a gen II wheel swap.

Followed the instructions but it's still not working. Did you have a multi function wheel before swapping by any chance?
 
Hi
No, mine had no steering controls.
 
elliot_holder said:
Thanks for the super quick response.

In that case I'll keep trying.

Guess you did cut wires 1&2 to extend.
 

New Threads

Forum statistics

Threads
124,531
Messages
1,441,204
Members
48,939
Latest member
Autocraft1
Back
Top