Just a quick visit to the workshop today. Mainly doing dull but productive stuff - I didn't think you would want photos of me cleaning carpet mats.... :?:
One of the more fiddly jobs is getting the washer jets back in. There is plenty of pipe on the offside, the nearside is very tight. To get the amount of pipe you can see here, I tool off the washer bottle reservoir.
The hole they pass through is pretty tight, so I elected to used the correct clamps rather than risk a small jubilee clip
And the clamp in place
Popping them back in is fairly easy once the heater wire is fed through. As ever, I smeared the hole with waxoyl for protection and some lubrication.
One of the more fiddly jobs is getting the washer jets back in. There is plenty of pipe on the offside, the nearside is very tight. To get the amount of pipe you can see here, I tool off the washer bottle reservoir.
The hole they pass through is pretty tight, so I elected to used the correct clamps rather than risk a small jubilee clip
And the clamp in place
Popping them back in is fairly easy once the heater wire is fed through. As ever, I smeared the hole with waxoyl for protection and some lubrication.